Load more
Carrying on the free-spirited expression of zines, which have colored underground culture, each member's blister pack is now available as part of the XG merchandise lineup. The set includes practical items: an oversized trading card, a sticker, a tin badge, a patch, and a magnet. The blister packaging enhances its collectability as a display piece.
●Use or store away from high temperatures and humidity, direct sunlight, and fire, and out of the reach of children.
●Do not rub the surface of the product with sharp-edged or hard objects, or subject it to excessive strain, as this may cause deformation, damage, or peeling.
●Do not place the product in close contact with leather or vinyl products, as this may cause deterioration, discoloration, or sticking.
●Do not use the product for any purpose other than the intended use.
Aluminum Magnet
●Keep magnets away from people with cardiac pacemakers or other electronic medical devices. Magnets can interfere with the proper functioning of such devices and pose a serious risk.
●Do not place magnets near magnetic storage media such as floppy disks, magnetic cards, or magnetic tapes as this may damage the recorded data.
●Keep magnets away from mobile phones, electronic devices, precision instruments, and electronic medical devices as they may cause malfunction or failure.
●Do not place magnets on uneven surfaces.
●Before attaching the magnet, make sure the surface to which the magnet will be attached is clean and free of dirt.
●The magnet may not adhere properly depending on the material or condition of the surface to which it is attached.
●Do not attach the magnet to the body of a car, motorcycle, bicycle, etc., as it may come off due to wind pressure while driving.
Satin Sticker/Sticker
●Do not apply to surfaces that may become hot.
●Do not apply to skin or put in mouth.
●Once applied, the sticker may become difficult to remove.
●Please note that after the sticker is removed, the adhesive may remain on the object to which the sticker was applied, or the paint or other materials may peel from the applied area.
Tin Badge
●Please keep the product out of the reach of children to prevent accidental ingestion.
●As this product contains a pin, please be careful when attaching or removing it.
●Do not give any strong impact such as pulling to avoid damaging the fabrics due to the nature of this product.
Woven Patch
●This patch can be used as a sticker or as an iron-on patch. Please read the instructions below before use.
●Please be careful when ironing as it may cause fire or burns and result in unexpected injury or accident.
●When used as a sticker, do not apply to uneven surfaces, fabrics, or surfaces covered with dirt or dust.
●Never iron at a high temperature or for too long.
●Do not apply to the following materials and surfaces: Heat-sensitive textiles, waterproof textiles, highly stretchable textiles, fluffy textiles, genuine leather products, and areas in contact with buttons or metal parts (such as zippers)
●Please be careful when ironing as it may cause fire or burns and result in unexpected injury or accident.
●Do not dry clean.
●Do not rub hard or scrub the embroidered fabric as the threads may come out.
●Please note that due to the nature of this product, the adhesiveness of the product will inevitably decrease over time depending on the environment in which it is used.
●Please note that once applied, removing the product may leave adhesive residue or damage the material.
●Please note that we are not responsible for any damage to the applied surface or other problems caused by this product.
Applicable materials: Textile, synthetic fiber products
Dry iron with a medium temperature setting (150-160℃) using a pressing cloth for about 20-40 seconds with firm pressure. After application, do not move the patch until it is completely cooled (about 5-15 minutes). (Sewing the patch after ironing will help prevent it from peeling.)
【Size】
Package: Approx. width 122mm × height 260mm × thickness 23mm
Big Trading Card:Approx. width 96 × height 148mm
Aluminum magnet: Approx. width 60 × height 110mm
Satin sticker: Approx. width 70 × height 100mm
Sticker / Silver: Approx. width 95mm × height 35mm
Sticker / Clear: Approx. width 95mm × height 50mm
Sticker / Triangle: Approx. width 60mm × height 50mm
Tin Badge: Approx. diameter 45mm, Approx. diameter 25mm
Woven Patch: Approx. width 70mm × height 70mm
【Weight】Approx. 105g (including package)
【Material】
Aluminum magnet: aluminum, ferrite
Satin sticker / Sticker: polyester, PVC, paper
Tin Badge: paper, tinplate, PP
Woven Patch: polyester
【Country of origin】China
※ To prevent the risk of accidental ingestion, please store out of reach of small children.
※ Magnets pose a serious danger to individuals wearing electronic medical devices such as pacemakers. Do not bring magnets near these devices as it may impair their normal operation.
●Use or store away from high temperatures and humidity, direct sunlight, and fire, and out of the reach of children.
●Do not rub the surface of the product with sharp-edged or hard objects, or subject it to excessive strain, as this may cause deformation, damage, or peeling.
●Do not place the product in close contact with leather or vinyl products, as this may cause deterioration, discoloration, or sticking.
●Do not use the product for any purpose other than the intended use.
Aluminum Magnet
●Keep magnets away from people with cardiac pacemakers or other electronic medical devices. Magnets can interfere with the proper functioning of such devices and pose a serious risk.
●Do not place magnets near magnetic storage media such as floppy disks, magnetic cards, or magnetic tapes as this may damage the recorded data.
●Keep magnets away from mobile phones, electronic devices, precision instruments, and electronic medical devices as they may cause malfunction or failure.
●Do not place magnets on uneven surfaces.
●Before attaching the magnet, make sure the surface to which the magnet will be attached is clean and free of dirt.
●The magnet may not adhere properly depending on the material or condition of the surface to which it is attached.
●Do not attach the magnet to the body of a car, motorcycle, bicycle, etc., as it may come off due to wind pressure while driving.
Satin Sticker/Sticker
●Do not apply to surfaces that may become hot.
●Do not apply to skin or put in mouth.
●Once applied, the sticker may become difficult to remove.
●Please note that after the sticker is removed, the adhesive may remain on the object to which the sticker was applied, or the paint or other materials may peel from the applied area.
Tin Badge
●Please keep the product out of the reach of children to prevent accidental ingestion.
●As this product contains a pin, please be careful when attaching or removing it.
●Do not give any strong impact such as pulling to avoid damaging the fabrics due to the nature of this product.
Woven Patch
●This patch can be used as a sticker or as an iron-on patch. Please read the instructions below before use.
●Please be careful when ironing as it may cause fire or burns and result in unexpected injury or accident.
●When used as a sticker, do not apply to uneven surfaces, fabrics, or surfaces covered with dirt or dust.
●Never iron at a high temperature or for too long.
●Do not apply to the following materials and surfaces: Heat-sensitive textiles, waterproof textiles, highly stretchable textiles, fluffy textiles, genuine leather products, and areas in contact with buttons or metal parts (such as zippers)
●Please be careful when ironing as it may cause fire or burns and result in unexpected injury or accident.
●Do not dry clean.
●Do not rub hard or scrub the embroidered fabric as the threads may come out.
●Please note that due to the nature of this product, the adhesiveness of the product will inevitably decrease over time depending on the environment in which it is used.
●Please note that once applied, removing the product may leave adhesive residue or damage the material.
●Please note that we are not responsible for any damage to the applied surface or other problems caused by this product.
Applicable materials: Textile, synthetic fiber products
Dry iron with a medium temperature setting (150-160℃) using a pressing cloth for about 20-40 seconds with firm pressure. After application, do not move the patch until it is completely cooled (about 5-15 minutes). (Sewing the patch after ironing will help prevent it from peeling.)
【Size】
Package: Approx. width 122mm × height 260mm × thickness 23mm
Big Trading Card:Approx. width 96 × height 148mm
Aluminum magnet: Approx. width 60 × height 110mm
Satin sticker: Approx. width 70 × height 100mm
Sticker / Silver: Approx. width 95mm × height 35mm
Sticker / Clear: Approx. width 95mm × height 50mm
Sticker / Triangle: Approx. width 60mm × height 50mm
Tin Badge: Approx. diameter 45mm, Approx. diameter 25mm
Woven Patch: Approx. width 70mm × height 70mm
【Weight】Approx. 105g (including package)
【Material】
Aluminum magnet: aluminum, ferrite
Satin sticker / Sticker: polyester, PVC, paper
Tin Badge: paper, tinplate, PP
Woven Patch: polyester
【Country of origin】China
※ To prevent the risk of accidental ingestion, please store out of reach of small children.
※ Magnets pose a serious danger to individuals wearing electronic medical devices such as pacemakers. Do not bring magnets near these devices as it may impair their normal operation.
Caution
*If you purchase "regular items" at once with different estimated shipping dates for "regular items," we will wait for the later arriving items before shipping them together.
*You cannot purchase "pre-order items" and "regular items" in the shopping cart at the same time. Also, even if they are "pre-order items", they cannot be purchased at the same time if they have different "product release dates". Please place separate orders.
*The number of items is limited, and sales will end as soon as stock is depleted.
*Product images are for illustrative purposes only. Please note that the actual product may differ slightly.
*Permits, regulations, and customs clearance rules for purchasing products vary from country to country and region to region. Please be sure to check the details by yourself before purchasing. Please note that we cannot accept cancellations due to these reasons.
*Please check the final price on the check-out page.
